Lighting control
Scenes, dimming, DALI integration, presence-based automation, circadian profiles.
KNX Automation for Intelligent Buildings
Lighting, climate, shading, and energy systems, designed and integrated as one platform. Engineering-grade KNX for reliable, long-term building automation.
What your KNX system includes
Climate control
Heating, cooling, underfloor systems, room-by-room scheduling, weather compensation.
Motorized shading
Blinds, curtains, and louvres, automated by sun position, time, and room function.
Energy monitoring
Per-circuit consumption, load management, trend analysis, optimization alerts.
Security & access
Intercom integration, presence simulation, alarm zones, access logging.
Multiroom audio
Zone selection, volume control, and source switching, integrated into the same KNX interface.
Is KNX the right solution for your project?
Good fit
New build or full renovationProperty 150 m² or largerClient wants a long-term, reliable systemIntegration of multiple systems (lighting + climate + blinds + security)Architect or designer involved in the project
Not ideal
Single-room upgrades or isolated gadgetsBudget is the only decision factorDIY installation without professional wiringRental property with no infrastructure access
Not sure yet? Use our budget estimator to check whether KNX fits your project parameters and budget range.
Working with architects
If you are an architect or interior designer specifying building automation, we provide early-stage coordination, technical specifications, and contractor support.
How to work with VirasmartEkinex KNX Partner
The hardware we specify
We work with Ekinex, an Italian KNX manufacturer focused on architectural integration. Every device is KNX-certified and specified by us as part of the system engineering.
Touch panel
Delego
- 7″ capacitive glass front
- 1280 × 800 IPS, full visualization
- KNX IP + PoE, recessed wall-mount
KNX push-buttons
Signum
- 1, 2, 4 or 6 rockers per unit
- RGB status LEDs, interchangeable caps
- Anodised aluminium, 55 × 55 mm
Flush-mount system
Serie 20 Venti
- Frames in 4 aluminium finishes
- Italian, German, Swiss mechanisms
- Combines KNX + Schuko + USB
Room climate controller
Sentio
- Capacitive touch display
- Heating + cooling, 2- or 4-pipe systems
- Fan-coil, underfloor and radiator control
Multi-sensor
Revelo
- PIR + temperature + humidity + lux
- Ceiling or wall mount
- Replaces 4 single sensors on the bus
DIN-rail KNX I/O
Ekinex EXT
- Binary inputs, switching & dimming outputs
- Blinds, heating-valve and fan-coil actuators
- Modular DIN-rail, KNX TP + KNX Secure
Why KNX, not wireless systems
KNX is used in high-end residential and commercial buildings where reliability is critical. It is the only open, wired standard for building automation with a 30-year track record.
Wired reliability
Dedicated bus cable, separate from power wiring. No Wi-Fi dependency, no signal interference, no batteries.
Long-term support
20+ year system lifecycle. Devices installed in 2005 still run. No forced obsolescence.
Manufacturer-independent
500+ manufacturers, 8,000+ certified products. You are never locked into one vendor.
Scalable
New rooms, new features, new integrations, added to the existing bus without rewiring the building.
Our services
Four engineering services, one team
Design, installation, programming, and ongoing support, all covered by one team across the full KNX lifecycle.
KNX System Design
Functional specification, KNX topology, group addresses, device selection, wiring schematics. The system is fully defined before installation begins.
Installation & Commissioning
Cabinet assembly, on-site mounting, bus verification, individual addressing, function-by-function testing in every room.
ETS Programming
ETS configuration, scene programming, logic blocks, third-party integration, touch-panel and mobile visualization setup.
Technical Support
Post-move-in adjustments, seasonal reconfiguration, system expansion, remote diagnostics, firmware updates, annual health checks.
Project references
New Build | Residential
Villa: Full KNX, 350 m²
120+ lighting circuits, climate (underfloor + cooling), motorized blinds, Ekinex touch panels, energy monitoring.
Renovation | Residential
Penthouse: KNX Retrofit, 180 m²
Wireless KNX extensions where wiring was not possible. Lighting scenes, climate, blinds, mobile visualization.
Commercial | Office
Architectural Studio, 400 m²
Presence-based lighting zones, daylight harvesting, meeting room presets, centralized HVAC integration.
Why Virasmart
KNX-certified team
Trained and certified on the KNX standard. ETS programming, topology design, and commissioning as core competencies.
Projects in Latvia
Completed KNX installations across Latvia. Residential villas, apartments, and commercial spaces.
Engineering background
Founded by a Chartered Thermal Energy Engineer. We approach building automation as system engineering, not gadget installation.
Energy system integration
KNX connected to heating, cooling, and energy monitoring. One team that understands both the automation layer and the mechanical systems underneath.
Smart Ecosystem
Explore KNX further
Six Virasmart entry points that extend our engineering work: the Ekinex KNX solution page, Displine tablet mounting integration, a knowledge base of technical guides, hands-on KNX training, a self-service budget estimator, and direct consultation with an engineer.
Ekinex · Solution
Ekinex KNX Systems
Wall devices, Delégo visualisation, DIN-rail modules and DICO intercom. Specified, programmed and commissioned by Virasmart engineers.
Explore Ekinex systems
Displine · Integration
Displine tablet mounting
Premium iPad wall mounts in flush and quick-release formats, designed into the KNX visualisation and interior plan, not added as an accessory.
See Displine integration
Knowledge Base
KNX theory & planning guides
Technical articles, topology examples, design patterns, and planning checklists, written by our team for architects, consultants, and building owners.
Read guides
Training
Virasmart KNX Lab
Hands-on KNX training programmes, ETS workshops, and certification support. For engineers, integrators, and in-house facilities teams.
Enrol nowBudgeting Tool
Virasmart KNX Estimator
Interactive calculator for indicative project budget and scope. Self-service, no consultation required.
Calculate budgetConsultation
Talk to a KNX engineer
One-to-one consultation on your project: system design review, equipment selection, and integration planning. For architects, developers, and homeowners with specific questions.
Contact usProduct catalogue
Browse matching products
All pricing is issued per project. Build a quotation list in the catalogue. Our engineers will reply with a technical quote by email.
Open in product catalogueOpens shop.virasmart.eu in a new tab
Planning a new build or renovation?
Tell us about your project and we will propose a system concept and budget range.